Well I received a vapeciga caliburn pod efun.top the purposes of this review.
Well nunchaku is available in several colors:
– Green Metallic
– Black and Gold
– The corrosion of iron
– Black Full
– Sapphire Blue
Description and features:
– Size: 27.4 mm x 94.5 mm
– Material: Stainless Steel
– Power range: 5-80W
– Resistance range: 0.1 ~ 3 ohms (VW), 0.1 ~ 1 ohm (TC), 0.1 ~ 0.5ohm (manual)
– Temperature range: 100 ~ 300 ° C / 200 ~ 600’F
– A new generation of E-cigarette panel Well Control, making boxes mod tube insurance
– Operating mode: the power mode, the mode TC (NI, SS), the bypass mode
– Battery 18650
– Ergonomic design felt perfectly at hand
– Pocket size when traveling
– simple interaction system
– Micro USB port for charging
In the frame:
– mod nunchaku
– USB Cable
– Warning Card
– User’s Guide
Well Vapeciga Nunchaku vape tube is fixed, powered by a battery and 18650 can operate up to 80W. In the widest part of the diameter 27.4MM mod is the height of the model is 94.5mm, but on top of the diameter is 25 mm mod. Nunchaku is not a big tube mod mod in my opinion, it has the perfect dimensions and mod is very comfortable to wear, feels good in the hand because of the way. Nunchaku are made of stainless steel and feels very solid, the build quality is excellent and I can not complain about anything here. color quality so far looks good so I do not see scratches on the mod mod and I use that a lot. You can buy this model in several different colors, 7 colors, black. In the MoD, you can see the details, from the top of the mod, you can see sculptures in the tube that you can see engraved “nunchaku Well”. At the top of the battery, you can see some details that help in removing the battery cover and at the bottom you can see engraved “Well Designed by”, “www.myuwell.com” and you can see the stars recorded. Personally, I think the beautiful mod, but this is very subjective.
From the top of mod, no connection with stainless steel spring loaded pin plating and thread here either. As have been said above a diameter of 25 mm, can be used here sprayers anything up to 25 mm without false.
Sub mod, you can see the battery cover, the battery cover also has a good thread and can tighten or loosen the mod smoothly. In the battery cover, you can see four vents. A getting out of the battery cover, it may be reduced pin and spring pin. Inside, there is a more mod pin and you can see very clearly marked with the red, so you know how to put on your battery. No it isolation mode, in which case the battery is used stripes, but do not use the battery if you notice any scratches on the battery.
From the top you can see the model and cable connection is fine here, I have no problem with my atomizers and pin here is gold plated and spring. This mod, can be used up to 26 mm diameter in atomisers without a good projection for me.
Sub mod have a battery cover and the battery cover, you can see some details that helps when you want to open the lid of the mod. Put here is really good. If the battery cover is removed, you can see the orientation of the recorded battery. As I said, this device supports 21,700, 20,700 and 18,650 batteries. Generally, you will receive an adapter to 18650 if dont’t 21,700 batteries. Personally, I really want to use the 21700 battery and think it’s great that this device compatible with battery 21700. On the back of the mod, you can see the USB port that can be used to charge the battery, and this mod support quick charge, but as usual, I suggest you use an external charger.
Before the mod, you can see the button on the screen and fire.
fire button on this unit stand out, very clicky and details that really count much in it. As the shutter button works very well. The screen of this device is small, but the brightness of the screen is very good and you can see the information on the screen without any problems.
As you can see, we have no buttons and less, but we have a sensor to be used here.
In addition, the board of this Vapeciga Crown Pod is dust-proof and moisture proof is really good.
To activate it you must click 5 times on the fire button to turn off the mod you have to do the same.
When the screen is turned on, you can see:
– coil resistance
– The battery indicator
To enter the menu you must click 3 times on the shutter button and the enter the menu, you will see:
– Supply Mode
– TCR Fashion
– Mech Fashion
– Factory settings
If you want to customize your power, you need to click 3 times on the shutter button, then you must select a power mode and after that you have to tilt the mod right to increase or left to lower watts of power. In the same way, when you enter the menu by pressing the shutter button 3 times mod must lean left or right to scroll. Senzor works very well and once when you are used, you can customize almost everything easy and hassle.
Protection on these devices:
– Short-circuit protection
– Low-voltage protection
– Temperature Protection
– the reverse battery protection
How do these devices work and my thoughts:
Show new Caliburn Vape is an improved version of the previous model. The design of this device is similar and I like it because this mod is very comfortable to use and I really like the tube mods. good building quality mod, feels like a very dense morning. This mod, can be used up to 26 mm diameter no more outgoing atomizers for me. the previous model is only compatible with the 18650 batteries, but they changed it and is compatible with a larger battery that is really good. Because of this mod is compatible with a larger battery is slightly larger than the previous bite. shutter button is very nice and convenient to use and remember than previous models E every day, I have no problem with the shutter button, I belive that also will be very good in the future. The sensors have here works very well and you really get used quickly and once you do, you will be able to customize quickly and smoothly. This mod mod is very simple to use than many people would like. Furthermore, it was very good that this board mod dust and moisture resistant. So far, this model works well and remember how long I was using his model before belive that I use for a long time without any problems.
If you liked the previous version of the mod b
In the tube, you can see the shutter button, the plus and minus buttons USB port and you can see the screen.
Here hold the fire button and it’s not hard to find in a mod when vape like, shutter button has several sculptures that can be felt under your finger. shutter button works fine, I have no problem with the shutter button it is very sensitive and dislocation. More and less boots work fine too and I have no problem, but when mod can stir here some keys rattle.
In the tube there is a USB port lets you charge your batteries in a mod, but as usual, we recommend using an external charger to charge the battery.
Basically, there is a very bright screen and the screen, you can see everything on the screen is very clear.
To activate the mod must click 5 times on the shutter button, the same is when you want to disable the mod. When the Ministry of Defense lights shown “Well Hello” on screen and after that if the power mode of the device is used on the screen, you will see:
– The battery indicator
– coil resistance
If you use the device in temperature control mode, appears on the screen:
– The battery indicator
– coil resistance
To enter the menu you must click 3 times on the shutter button, the menu can be seen:
– Supply Mode
– Temperature Ni Mode
– Temperature Mode Ss
– Bypass Mode
– Return to factory settings
– Exit the menu
Mod work uwell amulet vape watch get code of 5-80watts when the key roughly 0.5W watts is pressed up or down, and 80W power when the plus button and the return to 5W is pressed when the power is on and press the button 5W reduced, go to 80W.
You can lock mod really, all you have to do is press the shutter button and the minus button, you will not be able to use the mod at all until you open it with keys and reducing fire. You can also block only plus and minus buttons, for this you need to press the shutter button and a button, so you can vape but you can not adjust the power until the device is opened.
the entire first mod is a very good shape and feels great in hand and if you ask me it is very convenient to use, it’s hard not to find the shutter button, as is and engraving, which is a additional advantage. I like the size of a mod, mod height of only 94.5mm, which is a big plus for me, because in combination with most sprayers will be very pleasant due to the high that I can take with me all mod. Mod has a very interesting feature, I can lock the device, in fact, I love it because there is no possibility that can be activated in the pocket, is really not a problem to switch off the device before putting it in a pocket, but it was good we had a key choice.
This model is powered by a 18650 battery and can not use other batteries here, not only can use air battery of this mod 20700.
This device works great, the fries were good and I did’t have problems, so far so good. I use the camera low power and high strength and can not complain, it works as it should. Atomizers in a suit 24mm or 25mm diameter well in the Ministry of Defense, of course, you can also use smaller sprayers with beauty rings.
build quality as I said very good, a good thread on top and that I will not be a problem when you want to put the battery in the mod. shutter button and the plus and minus buttons run smoothly.
Basically it is a very simple model to use, you can choose from four modes, so there’s nothing complicated here and you can customize almost everything quickly.
I recommend this mod for those who like to use them a tube mods, I think it is a very good crown 4 tank click in and works as expected without problems so far.
– Can not use a 20700 battery
– The build quality is good
– Very comfortable to use
– Mod simple, use
– good appearance (subjective)
– Good Button
– The screen is bright
– Chip works well
– The colors look good
You can buy here:uwell vape https://www.vapeciga.com/collections/uwell