This review of Voopoo Drag Mini Vinci TC Mod Drag Pnp Coils

I received VOOPOO X217 TC Mod 217W sourcemore.com the purposes of this review.

Voopoo x217 color:

– P-aurora
– Pink
– Blue P-Prussian
– P-purple jade
– P-red

Specification:

– Power range: 5W-217W
– Battery: 21700 * 2 (Compatible with 20700/18650 battery)
– Output voltage: 0 V – 7.5 V
– Output Current: 0A – 40A
– Method of Resistance Power range: 0.05 to 3.0, 0.05 and 1.5 fashion TC
– Temperature: 100-315 / 200-600
– Dimensions: 93 * 50.6 * 33mm

In the box:

– x217 217W TC
– 18650 Adapter Battery x 2
– USB cable
– Manual
– GEN smart card
– Warranty Card

Voopoo Drag 2 Mini is powered by two batteries and this work mod to 217W.

The more mods voopoo also has a genetic chip which, in the opinion of my good chip. Mod Size: 93mm x 33mm x 50.6mm. I like the design of this model, I will change a bit, but basically this mod looks amazing in my opinion, very nice mod. On the side you can see the carbon, behind the mod, you can see precious resin panel, also in the back, you can see engraved “Voopoo” on the shutter button, you can see the bottom of resin and fewer buttons, you can see the logo.

From the top you can see the relationship stainless steel screws on the top of the MOD and this passage both very good child, I had no problems and we also have here a gold plated spring pin 510 as the peak mod atomizer scrathed not in a mod I can not see scratches above. In this mod, you can use up to 33 mm in diameter is incredible atomizers, which can be used essentially by the atomizer here almost fake.

Under the mod, you can see the battery cover and this part seems dated and still expect good because it is a very important part of the mod, so I told him to look good on the battery cover can see the ventilation holes and you can also see the statue. When the battery door is open, I can see engraved on the battery in the orientation. Powered by two mod 21700 20700 battery or two batteries and even if you do not have 21,700 or 20,700 18,650 batteires used with an adapter that will receive the package. It is very good in my opinion because I want to use two batteries 21,700. When the Department of Defense stirred with batteries inside can hear the sound of the battery would be a disadvantage for some people.

Before the mod, you can see the shutter button, the screen, less USB LED light and fairly large buttons.
This mod fire button at large, such as resin on the trigger, the trigger is also very clicky and it works well, no fire was completely lost, the button works great shot every time. More key job at least as well without any problem.
USB ports on this model can be used to update the software as a model of balanced so you can recharge your batteries here if you do not charge the external battery charger, but as usual, I suggest you charge your batteries in an external charger.
In the picture you can see how to wear a visible light on the device. You can change the color of the light or if you do what the light pipe can be disabled.

The Voopoo Vinci  Coils of this device is precious, the screen size is 1.7 inches and has a color screen. On the screen, you can see very clearly all the good information. On the screen you can see:

– Two battery indicator
– process
– (depending on the mode used) Watt / temperature
– Puffs
– Time hojaldre
– Coil Resistance
– Volts / Watts (depending on the mode used)

To activate the mod must click five times on the fire button to turn it off, you must do the same. You can also lock the device to do so, hold the shutter button and you must also do the same thing with an open mod. When you lock your device can not be used.
Each time you click 3 times on the shutter button can choose:

 

– Standard mode
– Fashion Tc
– The functions

 

When working mode or modes of the TC standard and maintains more buttons and less get more options. If you continue to plus and minus buttons below the “function”, see:

– Lock Menu
– select Clock
– Brightness
– Led select
– Dana chose the screen
– Select language
– It’s time to choose
– Set Date
– screw system
– Exit

 

As you can see, on your device, you can do a lot of that will appeal to many people, you can adjust the brightness of the screen, mod has the time and date can be set if a headache for him and you can change the flower wallpaper. Anyway, this mod has a lot of very nice selection.

A protective device:

– Protection autoliquidación
– Short Circuit Protection
– Protection of overtime
– Protection against overheating
– protection against output overvoltage
– Overload protection
– Load Balancing

How these devices work and my thoughts:

As I said I really like the design of this model, maybe I want more resin in the Ministry of Defense, but basically it looks great in my opinion. mod good, woke up very nice in hand and this mod is very comfortable to use.

At the beginning I did not like the position of the shutter button very fast but I got used and now I love Voopoo Drag 157W

large fire button, which works very well and I think the resin in good detail the fire button. The colors in the modern look great, so far no scrathes on mod, maybe a little on the bottom of the model, but almost nothing, a very good job with color here. In this mod, you can use up large atomizers 33 mm in diameter. The battery cover looks good so far and I hope it will do the job in the future. We have been here a little silly when you put the batteries and rocked the mod, you can hear the sound. You can also charge the battery mod, but as I said I’d suggest that you can charge your batteries in an external charger.

big screen, much of the information we have on the screen and you can see all the information very clearly. I also like that here we have a color screen and I like the selection of this unit. I believe that I like that I can use here batterries 21,700. Large genetic chip, which worked well and I had no problems.

So basically x217 well-built model and it works great with everything you have many options here, and if you like the design that can advise this Voopoo Pnp Coils

large fire button, which works very well and I think the resin in the fire button detail was good. The colors of the modern look, not far scrathes on mod, maybe a little background of the model, but almost nothing, a very good job with the color here. In this mod, you can use up a large sprays diameter 33 mm. The battery cover looks good so far and I hope it will do the job in the future. Here we have a little silly when you put the battery and rocked the mod, you can hear the noise. You can also charge the battery of a mod, but as I said, I recommend that you charge your batteries in an external charger.

big screen, much of the information we have on the screen and you can see all the information very clearly. I also like here, we would like the color screen and I like the choice of this unit. I think I like that I can use here Batterries 21700. high genetic chip, which works well and I have no problem.

sourcemore thanks

You can get the device here: Voopoo X217

 

dovpo mvv squonk basium nickel topside review

I very kindly sent by Odin 100 fourth and latest addition to the series is already famous collaboration between Odin Vaperz Cloud Dovpo and YouTube Sam Parsons also known as vaping critical range of Bogan Odin is one of the most mods box poular in the market today should not be an exception.

In addition I added dovpo mvv received T-shirts and hats.

Odin comes in a beautiful box small sleeve wrapped external removable no pictures of the mod only the name of Odin 100 against the beautiful fountains on the back is the content of the package with stripes and authentication code analysis in the area in which “get Odin 100 box mod, replacement extra battery, a good thick deformations cable USB Type C, manual battery usage of the danger of correspondence, social media and map control certificate quality.

specification

Size: 36.3 x 32 x 90.5mm

Material: Aluminum alloy / zinc alloy +

Display: TFT screen of 0.96 ”

Battery: 1 x 18650/20700/21700 (not included)

Output Watt: 1-100W

Output voltage: 3.2 ~ 4.2V

Resistance range: 0.06-3.5ohm

Charging time: Type – C 5V / 1A

Odin 100 is available in 5 colors, black, matte black, red, gunmetal and Siler, who sent me for review.

5 colors.png

A version of the budget of Odin Mini (of the same size) with the support of sophisticated chipset dovpo squonk with some protection, short circuit protection, overheating protection, high temperature protection, protection of low-power, unprotected cargo and protection of overtime, efficiency for better battery life and running as company SS-speed line with a time of 10 milliseconds shooting consisting of aluminum alloy aircraft with machine parts slot and rounded edges of the eyes impressive frame with rusty Finland at the top and base plates are coated with a mod. It feels fantastic hand looking absolutely spectacular.

It is a device with a single battery charge with a maximum power of 100 watts and can be used with either 18,650 (with the adapter arm Dovpo battery supplied) 20700 battery or 21700, easy insertion of unlocking the door battery battery at the bottom of the device with small amount of pressure to open appyling slide, insert the influence battery positive upward and then simply fall back into the battery door to lock closed, it has a subtle beautiful action, but it.Having solid Molicel used 20700`s Samsung 30T `s happy and 40T` Yes to report any basis whatsoever.On squeaker battery cover battery mod dovpo basium serial number with clouds and slogan Bogan.

On the front panel you have an electric skull Bogan button that looks fantastic and is a nice touch, the screen of 0.96 “color TFT display, access the menu (center button) so did not have to use 3 click to go to a nice and simple menu, control wattage and Last but not least USB type-C port for firmware updates.

As with all the rest of you have a family Odin Odin engraved on the left side near the base of the mod that sets it well and looks great.

The screen displays the battery bar, watt, resitance, applied voltage and amps drawn is shown in pink and green circle.The displayed information easy to read with a bright screen and do not mess together, very easy on the eyes.

All very clicky buttons and super responsive it would be nice to have a silicone bung protection for USB Type-C port, not a deal breaker you can pick up packages are cheap as chips.

Up above 510 is spring loaded and focused and will take dovpo nickel

26mm without overhang.

As I pointed out before accessing the menu could not be easier to simply press the middle of the three buttons and you are navigating through the settings using the top and bottom buttons.To lock keeps the device down menu and watt buttons down together for a second or two and it will lock, you can still fire the device but do not use the other functions and no chance of accidentally adjusting watts, to unlock menu on hold and go down again.

Scrolling through the menu options once you have the following

Power

Bypass – allows you to run the device is set up like a mod mech

NI temp

temp SS

TCR

STATS – here you will find your puff counter total time used / vaped (both of these can be reset)

BRIGHT – allows you to adjust the brightness of the screen

EXIT

I only use power mode and the selection was more my style bypass vaping running at 60 watts, using this in mtl mode between 8-12 watt battery molicell 20700 2 + days I got used.

TAKE NOTE if you plan to pick this one up.

Have a play around and follow the instructions in the manual mode for TCR I came in to find a printing error that says once you get out in coefficents You can adjust the wattage by holding menu and button + watt does not work after some playing around and trying to button various sequences I managed to find solutions press the menu button three times quickly then you can adjust the wattage.

I have been told dovpo topside on this issue.

(EDIT) literally only had a reply from We are aware and we will improve on the next batch of releases thanks

On a side note this chip so good I really hope Dovpo continue to use it for future projects

pro

Very good build quality and Finland

Comes with spare pk battery wrap

USB Type-C

18650/20700/21700 compatible

chips were very responsive

niggle

There is no protection silicone bung to the USB port.

deceive

Print error in the instruction manual

Decision

Although this is a budget version of Odin who / mini it has quickly become a mod my favorite, definatley not to be sniffed at is packed with features and very responsive simple to use was felt fantastic solid in the hand is definatley one you should make sure to take it will not disappoint very easy to use and with a price tag of around £ 60-70 which is an absolute steal.

available here:dovpo

 

Comments on e-cigarettes under the smok brand

Smok nord 2 come in several different colors:

 

 

– Blue red

– black Amarillo

– Black red

– Silver Black

– Red Gold

– crimson

– 7 colors

 

In the package:

 

– Poison MOD

– Deposit TFV8 Big Baby Light Edition (5 ml)

– Basic Baby-Q2 V8 (double coil 0.4ohm) (pre-installed)

– Baby-T8 base V8 (0.15ohm eight rolls)

– glass tubes replacement

– 6 color pairs of O-ring

– USB Cable

– User’s Guide

– Bedrooms

– Warranty card

– Warning Card

RPM80 Pro

 

Smok mag is a very nice and clear designed device with a great edition tfv8 baby looks good atomizer. a design very attractive with many details, especially on this device brands mod is very different. The most interesting is that the atomiser mod and we can see a lot of LED lights. It is even possible to change the color of the lights, but we’ll talk soon.

 

In the box, you get a lot, you will receive a infants light tfv8 mod edition Poison, two coils and everything you need, but also in the package you receive or ring that can be used to change the color of the LED light on the atomizer and two rings of beauty, again, a very nice together.

I received this SMOK Nfix Kit 25W in 7 colors, this is subjective, but I like the way it looks, of course, you can buy this product in different color options.

the build quality is very good, everything is as it should be. color quality is also very good, Smok improved and so far I can not see a scratch on the mod or spray and use it every day at home and out of me, for now everything is fine.

 

 

light edition Tfv8 baby blowers

 

 

 

Atomizer diameter is 24.5 mm, a height of 56 mm and a weight of 60 g. Atomiser is made of steel steal.

 

Atomizer is tfv8 baby is great, but a little different, this one is lighter and has brought the issue to light, so when the spray shine spray. In the atomizer, led by a white light, but if you want to change the color of light that can be used or ring the package and change. For example, if you replace the O-ring with blue, when spray, aerosol blue glow. The build quality is very good, very good thread, and can not say anything about the poor quality of construction.

 

In addition to the atomizer there are extreme swing with two O-rings on it. Council drip very good start. Dropwise actual high point, the magnitude of the falling edge: The height is 19 mm in diameter and 15 mm, I think it’s convenient to use.

Under the advanced drip, you can see the hat is an atomizer top fill. This high filling is very popular and very easy to use. All you need to do is push the envelope and see a hole where the tank is filled, you can fill up very quickly, I love it.

In the upper lid, you can be seen recorded “Smok” and can view the details recorded unscrewing the cap help to change the coil or for cleaning the sprayer.

 

Put fire and a base very good and clean. From the bottom of the base, you can see engraved “Designed by Smok”.

Basically, you can see the control ring airflow in the ring and you can also see the same detail as on the upper deck and details of help when you want to customize the air flow. ring good airflow, can adjust the air flow is very accurate, and can not move to chance. Ring stop existing airflow and can not run forever, I want to see the top of the atomizer. Sprays have two holes on either side of the air flow and fits on the one hand, it will be the same on the other side. Flow of soft and hard air.

 

5ml capacity of the tank, but the rules of the European Union, you can purchase 2 ml tank. It can be purchased separately a glass bubble to the atomizer and the capacity will 7ml glass. I like that it is possible to expand the capacity of the atomizer. No glass bubble in the package, but you will get a glass a backup in case you break one. Or the two rings having a tank well.

 

Generally, you will also receive two coils. A coil is baby Q2 v8 core, coil resistance is 0.4ohm and this coil is installed, power is recommended for this coil 40-80w, but it would be better to use between 55-65w. Another coil that will receive the core package V8 baby-T8 and resistance of the coil is 0.15ohm the 50-110w force recommended to the coil, but it would be better to use between 60-80w.

I always like to say, before filling the tank and vaporizer, you first need to prime the coil with a few drops of liquid and, then fill the tank and is ready to dry vape without success.

 

Tvf8 edition big baby light spray work very well, either with my mail evacuation of liquid (vg-pg 70-30), so there is no leakage, actually there is no problem with this atomizer at all. steam production is very good with this tank, you can definitely enjoy if you want to chase the clouds. The taste is so good, can not say anything bad taste.

Smok trinity alpha

 

This mod is a double mod 18650 and you can see the LED lights are beautiful and you can change the color of light.

 

Specification:

 

power range: 1-225w

Size: 86 mm x 47 mm x 30 mm

Weight: 180 g

Resistance Range: 0.1-2.5ohm (VW) /0.05-2.0ohm (TC)

Temperature range: 200F-600F / 100C-315C

 

 

Is shaped device is very nice and I like the way it feels in your hand.

At the top of the camera, you can see gold plated spring pin 510. In the device, you can see many beautiful details and many LED lights, you can see aslo two details engraved on one side you can see engraved “Smok “On the other hand you can see recorded” Poison “.

 

This device has a lateral flame-shaped buttons are very nice and want to use the device with the power button is placed on the side. shutter button is also very large, but can be activated if the top half of it is pressed. Anyway, it is very comfortable and the shutter button can touch with your fingers or palm, it all depends on how you press the shutter button. shutter button works well. Below the screen you can see the plus and minus buttons, very clicky button.

 

In this device, you can see the USB port, you can use this USB port to charge the battery or upgrade the software. Smok balance for charging, so you can charge your batteries here, but as usual, I suggest you use an external charger.

 

From the bottom of the camera, you can see the battery door, it’s hard not open the door, I love the fact that the battery cover, you can see very clearly how you have to put the battery. The battery cover is a nice place when batteries and battery safely inside, the door can not be accidentally opened. You can not hear the noise when the device is shaken.

 

Smok Poison has a color screen is very large and beautiful, the screen size is 1 inch. The screen brightness is good and you can see everything very nice.

 

To activate the device, you must press the shutter button 5 times. After that, you will see “Smok” on the screen and you will see a version of the software.

 

When the device is turned on, you will see on the screen:

 

– dual battery indicator

– Power (W)

– voltage

– coil resistance

– hot

– against blow

– Time puff

 

Thus, on the screen, you will see a lot of information, and if you ask me, is all you need, I have to say that I like the battery indicator on the screen.

 

When the shutter button is pressed 3 times the device will be on the menu, and the menu can be seen:

 

– setting mode

– Puff the establishment

– Screen settings

– diode

– To turn off

 

To navigate the menu using the shutter button and the plus and minus buttons. If you want to enter the submenu fire button is pressed long.

 

You can use the setting mode to choose the work mode:

 

– Power mod

– Ni Tc

– Te Ti

– TC SS

– Memory game

 

Now, for example, if you want to change settings in the power mode, you must click 3 times on the shutter button and select the watt and hold the shutter button, you can adjust the power and brilliance, of course, you can adjust the power on the main screen with the plus and minus buttons.

From the menu, you can also reset the counter puff, or you can set the limits of the meter.

You can change the color of the display time and display. These devices have 6 colors available, you can choose from blue, pink, orange, red, white or green.

Then you can change the color of the LED lights and can also change the style of light. You can choose from 12 colors are available in the photo you can see the colors.

As I said, you can change the style of light and you can choose between normal mode, the flash and faded style.

You can also choose when the lights shine LED, you can be put to shine when vaping, when the screen is on, or can be set to shine all the time. Of course, you can turn off the lights.

To switch off, you must go to the menu and you must find the option to that is another little usual.

 

When the device is activated, with 5 Click the shutter button and locked when locked, you can not use the device.

Each time you change the atomizer, you are asked whether new or old reel and see the coil resistance before and a new coil.

 

Smok Poison worked very well within the chip is very nice and it was pretty accurate, I can not say a bad thing, as good quality. The screen is bright and big and I love it. Honestly, I want to use this mod with LED lights off, but I think people will love the features, looks good and interesting, sometimes I turn on the light and I admit, it looks amazing. I also like the fact that you can turn off the LED light, so if you like the features you will use if you do not like, you can always turn it off, but you can not turn off the LED lights inside the atomizer. If the LED lights as surely love this mod.

Another advantage is that the balance in favor of charging models. In this device, you can manage all mod has so many good features, even more than necessary, which is a great advantage. This device is very suitable for dual battery model and I really like the side of the shutter button.

 

As we all know, is Smok a company that now manufactures high quality equipment and is also atomiser does not disappoint and this mod chip is very good, in my opinion, this is a very good tool.

 

You can buy it here: smok vape

Smoant Pasito Vape, Replacement and Charon Baby review

In summary and evaluation

Propel is a very good entry into the Smoant Pasito Vape Pod System And the best thing I’ve tasted to date, Replacement RBA Coil Head it even better. A reference that will take some beating – A must buy.

(Read on if you want to know why).

 

Ranking 9/10 – game changer

The highest value that can give because I do not believe in the 10/10. Perfection is subjective.

 

POD / AIO / MOD ??? – opaque line

I would put this in the category of AIO, but can technically be classified Mod tank and reel changes. Line with the evolution pods blur, leading to devices like Propel – Catfart calls for all I care! It is a compact spray device and I like the way the market is growing.

 

Main feature

Propel rich in features for such a small device, here are some of them:

 

Box content and content

From the start, you know you have something special; box is one of the packages are served better than I’ve seen with magnetic flap folds open to reveal a double which in turn reveals Propel. So there is the information printed on the flaps and the box with a USB-cable C is accepted, the additional coil and some cards will not be bothered to read (but not).

 

Very impressive at all, although it would be better if you include the RBA.

 

contents

1 x mod Pasito

1 x cartridge Pasito

1 x Ni-coil 80 MTL 1.4Ω

1 x DTL 0.6Ω mesh coil

1 x cable load Type C

Warning 1 x Coil

Card 1 x Certificate

Warranty Card x 1

1 x User

First impression

A good first impression with the opening of the packaging, real Pasito own! It’s a nice bit of kit is a solid, well-designed, and the magnetic connection is made to remove and replace the spool winds. Style met with a mixed reception, I personally like. Smoant the following claims:

 

“CPR INNOVATIVE TECHNOLOGY

CPR is used as a material design that produces colored finish more beautiful and durable. No fingerprints. ”

 

grandma hand, I do not know CPR?

 

CPR?

colorful printed resin?

Piss reaction cow?

My best guess is the second choice, but who knows? Additionally, Smoant Pasito II Pod Kit reacted and released a stylish addition to the carbon fiber should meet the enemy. Have time to be admired mod, I put it on charge faster and C friendly with USB cable. Then I begin the coil to the nacelle. He pulled out of the base, then simply unscrew the coil connector, very easy. Then I primed coil with a few drops of my favorite Nic juice Salt and screwed back and pushed together.

 

To fill pods, open ends and open fall to pay your eJuice without air pockets. Although it was dark plastic, it is easy to see the level of juice. When finished, replace the dropper tip and allow 15 minutes to soak and ready to vape.

 

The Pasito not ignore one of the most desirable features of an AIO, and adjustable airflow. He treats the cursor a little uncomfortable at the top of the nacelle. MTL layer (Mouth Lung) and DTL (Direct To Lung). Although a little checklist to adjust, it is a welcome feature and benefits for me. It’s not the size of the smallest, but still a good compact and pocket friendly:

 

Features, comments and coil operations

On the one hand, the button shutter button, USB-C power control and ports. Interestingly willing shot dead button, which was unusual at the beginning, but I quickly got used to me. I find it easy to fire at several points waiting with fingers or thumb, a place never highlighted “pockets of fire” and have a high resistance. 5 button power settings to adjust power levels gently hard, the lowest power level suited me, but they are heated to improve vaporiser:

 

10 watt increase – 13-16 – 20-25 watts.

 

Basically there are a lot of ventilation holes on the opposite side to empty the shutter button, the rear panel is simply a function without CPR. CPR before two separate panels, one on top of the LED 5 serving for various functions:

 

power level – click the button at the desired improvement and see every point of light accordingly.

Battery Status – press the shutter button five lights will flash at full charge and decreases the number of points are displayed as the battery level is reduced.

battery levels – Each point reflects the charge level: 20% – 40% – 60% – 80% – 100%

A Pressing the shutter button five times to put the unit on standby and 5 clicks to return.

 

That’s all there is to do, very intuitive and easy to use. As mentioned above, the car has a magnetic connection and loosens easily but still adhere. Maybe unleash hell thereof and will remain in place.

 

“Pod” has a sliding property cartridge falls to the tip, which can be substituted with other suggestions Propel. boring is a commitment to meet the needs of MTL and DTL and to be honest, it was very good for both of them. There is a small plastic slider for controlling the flow of air, wide open to attract strict DTL, MTL almost closed provide a very good draw.

 

battery life is very good and much better than expected with a battery of 1100 mAh, and the cost is also very fast, even at the price of 1 ampere her. Which should last a day on moderate use.

 

bobbin

MTL: 1.4ohm coil Ni-80,

DTL: 0.6ohm DTL mesh coil,

Replacement MTL-Ni80 Coil Head.

I was very impressed with everything about this kit, I had high expectations for the coil. Fortunately, they met and then some. The taste is sublime with longevity. 1.4 Ohm MTL salt vape Nic perfect grip and gives a really smooth, no precipitation or spitback. Force Level 1 is the group of coils, offers a warm and quick with his vape Ni80 material. 0.6 Ohm DTL kick nets as a donkey in the right direction. I was surprised how much this as DTL vape this low power, a rich and full flavor even at the highest levels of power 1. took it to Level 3, which is very hot and give a lot of clouds if you are in it. Initially, I tried the juice but try 70/30 50/50 and handle it well.

 

Compared with

 

I will not bore you with the details, all you need to know.

 

The only area that Propel Insurance is very high, but we’re talking about is already small, and no matter the device. Trinidad Smok Alfa closer to the characteristics and flavor, but a big disappointment for neglecting to incorporate adjustable air flow as it was very spacious (the next revision). Another mention only decent thing was Artery Pal II, which is very close in flavor and feature adjustable air flow with the new HP coils. In second place nearby but adjustable power function. Now it has launched Pal II Pro handle, but it is a great professional who struck all the water, we will see later.

 

While AIO (all in one), mostly covered, but came the icing on the icing!

 

Charon Baby Pod System Starter Kit

This is a game changer and make an AIO stunning and unbelievable!

 

consisting of:

 

platform RBA

HOME

510 adapter (so you can try and burn dry or mod Template ohm coils)

wire 2 x

Cotton

Screwdriver

seal Parts

I had to wait several weeks for the RBA me because I ordered from China, so I’m happy to use the coil. I do not think that to beat the media roll, but this option is much cheaper. After building the first one, I was surprised how easy it is to build a small bridge. A wire coil usage included (Ni80 I), which is a little rough hand injury up to 2.5 mm diameter rod.

 

This may seem tedious, but it’s pretty easy to get to the coil. Waiting on the bridge and prefolding legs to match the holes in the two positions. With the lower coil legs, the first entry is easy, but the second requires a little more attention, just use a small pair of forceps and needle tip insert around. slightly lower pin screws, not too tight you have to pull his leg with forceps, and once it is satisfied with the position that can tighten the screws (possibly with a coil of rod in 2.5mm) . This will damage the bit if the pinching rod coil and pull up to remove the air stream and the posts, then dried and pressed record shaped ceramic tweezers to remove any access point. Check Ohm stability and no shorts (mine is 1.4 ohms), you are already ready for the axle.

 

Cut strips of the axis of about 6 mm wide and remove the thin skin on both sides (not remove too), the rollers were loose, then press one end of the wire through the coil you. I found the strip through with some tension at both ends it helps maintain the shape of the coil. He must get by with little resistance. If it is too tight, it will test more coils means there is too much cotton. Cut to length, should reach just below the base, then slimmed down a little trick. Then, the spindle and the axis of juice (about 8 watts pulse is added when the juice) and feet when wet, must be in the Meta comfortable in a circular groove. Finally, screw in the manufacture of brand fireplace careful not to slip on cotton yarn.

 

All that remains to do is remove the base 510 and the screw on the bottom of your reel Propel makes the job!

 

Like much, but it took a few minutes total.

 

If you still are not sure then YouTube is your friend, find “Pasito Smoant RBA.”

 

So I installed Propel RBA coil in the cartridge, fill and tested. Not expecting much, I’m surprised how fantastic taste frikkin, especially with my first weird construction! They smoant have excelled in their R & D of the whole package. Despite the large roll of values, just use RBA now my skills have improved with each generation, I really liked the construction of RBA. It is much easier than many MTL RTA is mine.

 

conclusion

Well, if you’ve read this far (well done), you see me in love with this AIO device, especially with the incredible RBA. I arrived at the advantages and disadvantages soon and I will fight with the inconvenience!

 

It would be nice if they included the RBA, but, to be fair, for the price was an incredible deal and I appreciate all the love in the world, not to build its own coil which is understandable remove PVP RBA is maintained.

 

I have tried and are numerous teeth and AIO Smoat Pasitio too but in their own league and it will be a tough act to follow. And others to follow, and more devices with options RBA or close, which is a positive development. “Fire and forget” pods still have their place and could see that the market is fragmented, but Pasito be the reference and if the new device is woke up late happier! Meanwhile, I am more than satisfied.

 

I’ll buy another if I lost or broke mine – I have “alternative” and that the RBA purchased 100% YES.

 

pros and cons

Pro

First sense of the market.

Variable watts.

construction quality.

Magnetic ‘Pod’.

coil is excellent values.

Easy to use.

Packaging and presentation is the best I’ve seen.

RBA excellent choice.

Battery duration.

fast charging.

USB-C

adjustable airflow.

easy filling.

Style (subjective).

Pocket friendly.

Longe use.

Tank 3 ml (2 ml TPD).

Value.

Cons … .. uh …….

The model of love or hate.

RBA are not included.

More than most.

The DTL little too restrictive.

I do not know what CPR.

The box was too good to throw away.

I thought I was going to give

Anthony Vapes: Advken Manta RTA Review

Hi all, Anthony woozy back here with my Advken Manta RTA. Warning: This product was sent to me from elementvape.com

 

comments Disclaimer

I review the products for what they do not take into account where it comes from or who made it. The results of the test results for what is in my hands. Due to possible differences QC your experience may be different. I spent more time with the product and then most of the criticism and try to be thorough, making disassembly to check faulty design, test accuracy, and stress testing, which is usually done in the ‘care industry to try to “force” the failure diagnosis or potential failure point to give me an idea of ​​the life of the product. That said, there is no way to predict whether or device will last 6 months, 1 year, 5 years, etc. Each item is produced from cars to cell phones to computers pods may have arrived DOA or a small% failure rate. There is no way to predict or quantify it. That’s why there are guarantees and lemon laws. I can look at what I have in my hands for better or worse. Contrary to popular belief, there is no special review samples of top quality. Most of my personal time to get the commercial version, sometimes I get their initial version is usually worse than the final retail version.

 

Introduction:

Manta RDA is the last Advken. They are a company that has been around for a while, but with little fanfare. Most popular products, they can gorge mad hatter GDR and with a gap on the hinge for easy filling. Manta part double coil air flow RTA with a capacity of 4.5 ml with glass bubbles (or 3 ml of capacity with ordinary glass) and is available in 5 colors, black, SS, rainbow, blue, and gold.

 

Manufacturer Specifications

Staniless 24mm stainless construction

Double gold plated curve Post and Central Bridge Section Section

Top System Re-filling

adjusting tri-water-holes System

510 wire and gold plated Pin Contact

Chubby normal standard tube spare glass and glass tubes

4.5ml / 3ml capacity According Choice tube

Coming up with a screwdriver and Confederate Bag

Standard Gift Box Package

Included in the box

1 Manta 24mm RTA

Extensions 1 Glass Bubble

1 Doctor screwdriver coil

Spare parts and O-rings

 

First impressions and characteristics

When I arrived this RTA I was very impressed by the performance and quality of it. A gold was only an impressive finish to it. The thread and the O-rings are really good. No O-ring sticking or damage to the glass to disassemble. air flow by using three separate holes instead of a large on each side. Ideal for people who want to lose air. It is a little tight but and it can be difficult to adjust in the mod.

 

Deck Construction (photos above)

Let’s talk now to build a platform. It is rather the style rhythm as in the second holes after 2 bridge by post but with more metal in it. Each lead has got the hole itself was always good and it is easy to build one. They use the hexagon socket of good quality which is my favorite. It also has some extra metal between the coils with a hole. conditioned air flow is downwards with two relatively small holes in the bottom of each coil. platform, it is very easy to align your reel on the air flow but do not have a lot of space in it. It is more suited to lower power smaller construction. I found 3 mm max be fit there and 2.5mm also works very well. Overall easy to build a platform made for a small construction

 

Wicking is also easy. This is a GTA-style platform is really low down. No JFC and no leakage. It was quite forgive, but you want to use a lot of cotton. Not too much throttle, but enough to fill all the slots with a cotton tip flush on the bottom. You should be able to adjust your tweezers easily between cotton and filling holes that are small enough. I found the coil 2.5mm You do not need your slim prospects at all. With the son of 3 mm reel you want to lighten a little.

 

success

Performance wise, I use it as a double coil RTA only as intended. I ran three building luxury coil through it in the range of 5-6 packs of 3 mm and 2.5 mm ID. I also ran 2 rounds of simple construction with 26 envelopes of measuring instruments 8-9 Nichrome 1 mm ID 3 and 1 in the 2.5mm ID. Overall, I find that it works well with everyone to build. It is quite flexible and does not need anything fancy to taste good but I would stick with either 3 mm diameter 2.5mm ID or ID of the coil. There is plenty of space for a large building, it is best to use in the range of 40-70 watts. I would not take much more than that. That said, I get a very good sense. This figure is higher than the average TSR average watts. I feel I’ve done the best construction for the taste is luxurious 5 reel film run 2.5mm ID TC 60 watts.

 

Overall impressions, Details and Extras

This is the bottom of the RTA and the AFC air flow is smooth, but a little tight and the cap. glass bubble, it is difficult to adjust when he was in the mod, but easy to adjust when mod. It has complete high level where you unscrew the lid and expose two large filling holes. top hat has a textured design as well and is easy to grip and open the cover. It is easy to fill all kinds of bottles or just poured juice. I used the 70/30, 80/20 and juice “max VG” in it without problem. It comes with a standard 810 point drops manta Ultem and wrote on it. It is really good and easy to disassemble with minimal parts to it. All nice and smooth thread. It is the RTA diameter of 24mm should therefore not wrong on most mods. 4.5ml capacity is quite good with a glass bubble for tanks that do not really drink juice.

 

pro:

manufacturing quality

visible

color selection

Tip 810 standard

build a bridge and posts good quality screws

marquee filling design

above the average for the direction RTA mid watt

4.5ml capacity

The inconvenients:

Build a platform is limited to the coil size

AFC difficult to adjust when mod

Conclusion

So with all that said, I recommend the RTA? I do not like to or not difficult, but it will lean slightly toward yes but with a caveat was added to the average VAPERS watts. If you want VAPE over 70 watts is not for you. If you want VAPE 40-70 watts and does not blow the juice and still get a good sense, it is a very good choice. It will not make my top list, but it is still good enough dam RTA. I’ll add to my list

 

It can be purchased here Manta 24mm TSR Advken | Staggered two Design Post at 32.95

 

It was Anthony fried keep only honest, I hope you can all say the same thing and I’ll catch you at the next review.

 

For a good recommendation please check my Google sheet located here

 

This sheet will be updated regularly so feel free to bookmark it.

 

Once again I want to thank you for sending me this elementvape.com for the purposes of this review

 

Also if you missed some of my past reviews you can find it here Save Me

Madecat_vapes Review – Eleaf Mod Kit

ECF Hello! Today I am reviewing for you Eleaf Mod Kit. The Tessera Kit is a pocket-friendly, internal drum kit with power and style. So how well Tessera hold up? Read below for my evaluation.

 

This kit was sent to me from Eleaf for review.I had the Tessera kit for over a month now and feel that I can give a fair assessment of its quality.

VW Mod Kit is an internal device with Eleaf battery, equipped with a 150W output power and a wide range of choice of typical residential TC. This kit comes with a “new” TS tank shead for Ello, Ello is essentially a tank with some design elements are added to match the design model.

 

Let’s start from the top.

 

hook pin 510 and appears to be determined by the background / in the unit. Because the device has rounded corners is quite pronounced throughout “plaque” circular at the top allows it to accommodate up to 25 mm Attys no false appearance. The gap at the top is the aspect of the design that I assume to give a uniform display device because it is necessary both for the logs. The next feature, I prefer a cleaner look that big gap, but I understand why they go that route.

 

Speaking of logs, it was pretty clicky and responsive and works regardless of how you hold the mod. mod that looks like it was designed more with the left-handed people in mind, because it is usually with fire button activates bar by palming the device and use your fingers to pull. However, I am left hand and because I do not want palm screen I use the thumb to pull equipment. You do not get the same “grip” experience as it does the other way, but it works very well. I also find that if a leftist always wants to manage, no logs problem that is activated in the palm of your hand.

 

The front of the model home screen, and +/- function / Mode / Stealth, and port USB. The screen itself is gorgeous. It has a very high resolution and the color theme can be changed according to your wishes.

 

In ordinary electric mode, you can see your battery life, front and center watts, volts, resistance coil, time and date.

 

In RTC mode, the clock takes the stage and you are presented with the option at the bottom of the s.

 

TC mode is a blend of power and the PSTN mode, the temperature still able to show you in front of your s.

 

The design of the interface and the menu on Tessera is quite nice and the entry of the function / mode / stealth button is an option that really enjoyed it. I love that it’s a versatile, allowing you one-click your device in stealth mode, or press and hold to scroll through the mode of shooting. However, you still have the 3-click on the fire button to enter the menu system. Why not go in on the button for this function? I feel like this button underutilized.

 

I ranted previously about too make a shortcut in all places, but I feel like Tessera can benefit from a few shortcuts. The main two I want to see is: the one that allows you to turn the power of the TC; and to lock watt for TC. This option is present, and you have to enter the menu and set the submenu to get there. It is a matter of preference for me, but I feel like it will be much easier for the user to have.

 

Move with the design, polygonal appearance at the front gives little awkward appearance. This device has a peak at the bottom of the screen. I do not know if the operating angle (probably causes less screen glare), but it was different from what I’m used to seeing. Design on the back is used as a sort of ergonomic grip. At first glance, it does not seem that would be good, but it was actually pretty comfortable, especially with rounded edges of the device.

 

The lower part torq mod comprises two fixing screws of the bottom plate and the reset button to zero housing recession. I did not use the reset button, but it will consider restoring the factory settings. You can see the difference that I spoke from the top of the mod. They do not mess with the way

Performance

 

This mod performs quite well. Power mode outputs decently and consistently and I never had an issue with a misfire or anything similar. I used various builds in multiple attys and Power mode did great for each. I will say that I tried to keep my power output at or below 75w as I feel like this is going to be a good spot for a compromize between power output and battery longevity. I realize the device is using a decent sized battery, but I tend not to vape at too high wattages anyway, so at or below 75w gave me some decent battery life.

 

In TC mode, I had a bit of an issue at first. Using single coil SS316L 26/30 clapton I was consistently botted out of TC. I swapped my build to triple core 30*3/38 and it worked a lot better. I used this build on there for a while and was only booted out once. I don’t know if it had to do with the mass of the wire I was using or what, but good TC shouldn’t do that, regardless. While TC worked better for the smaller-core build, it still shows an inconsistency with TC performance, so I would not recommend getting this device solely for TC.

 

Since this is an internal-battery device, charging is another main category when it comes to performance. The device supposedly has temperature protection while charging. I believe it’s supposed to automatically cut charging if it senses the device getting to warm, and resume once the temp drops back down to a predetermined range. The first few times I charged the device was with a wall charger and the device seemed to get really warm. I didn’t notice it ever stop charging, but maybe it didn’t hit that critical zone. After conversing a contact at Eleaf, I swapped to the provided USB cable and charge via PC. This produced a better result and the mod didn’t get nearly as warm, so I would recommend charging the device in this fashion. Charge times were also really quick regardless of how it was charged.

 

 

Ello TS

 

The Ello TS is essentially the same tank as the Ello Subohm Tank and uses the same coils.

 

The Ello TS tank is a decent little top-fill subohm atty. The adjustment ring moves pretty smoothly and there are quite large slits for the airflow. This should help accommodate those that like ample amounts of airflow. The sliding system moves easily enough when pushing on it and has a satisfying click open and close. The fill port is adequate for whatever type of bottle you have.

 

The HW2 coil ohmed in around .3-.34 and the HW1 was .2-.22. The HW2 coil is NiCr and the HW1 is SS316L with ceramic around the outside of the cotton (to retain heat I assume). I personally liked the HW2 coil better. It had better flavor, but didn’t quite last as long. Whereas the HW1 lasted longer with less flavor. There are also three other options for coils: HW1-C-.25ohm SS316L; HW3-.2ohm NiCr; HW4-.3ohm NiCr.

 

As far as performance goes, this tank is okay. I’m not really a subohm tank kind of guy, so I’m not the best at evaluating subohm tanks. I can compare it to an RDA, but that’s not really going to be a fair comparrison. I think it’s decent for what it is. Am I going to run out and go buy it?…nope. Would someone else get enjoyment out of it?…yeph how.

Final Thoughts

 

Pros

Compact Design

Convenient Internal Battery

Fire bar activates easily without having to palm the screen (for lefties)

Screen resolution

Simple interface

Function button

Polygonal hand ergonomics

Power mode performance

Quick charging

Cons

Gaps at top and bottom of mod

under-utilized Function button

no shortcuts to change TC watts or lock TC resistance

TC inconsistency

 

I really think this is a decent little device, especially if you’re going to be predominantly using it in Power mode or using smaller wires in TC. The feel of the device is quite nice and I love how small it is. I really like the internal battery because sometimes I just don’t want to worry about swapping out batteries. With this, you just charge and go. The screen is quite beautiful and the interface is fairly intuitive.

 

I don’t really care for the aesthetics of the gaps at the top and bottom of the mod, but I understand why they are there and it’s more person preference and doesn’t affect how the mod performs. I really love having a function button on mods, and appreciate it’s inclusion on the Tessera, however, it feels under utilized. I also cannot recommend this device if you are looking for good TC as it is too inconsistent.

 

With that said, if you’re new to vaping and don’t want to worry about keeping batteries married or carrying extra batteries, this is going to be a decent kit. Even if you’re an experienced vaper and you just want something simple and small for a quick out and about, the Tessera will get the job done. Just don’t expect great performance from TC.

Vape MODS 18650 21700 Or That You Think Is Best

The long history of the 18650
The rechargeable lithium ion battery 18650 has long been the standard emission power supply for mods Vape. This name is derived from 18 650 dimensions of the battery: 18 mm in diameter and 65 mm in length. Designed in the 1990s, this design has found its way formidable in laptops dovpo 230w, flashlights, electric bikes and even the Tesla Roadster original. You read, the electrical industry Tesla roadster disturbing is powered by the same batteries you use in your favorite mod.

Tesla made a wise choice to choose the 18650 for their first car. Billions of 18650s are made each year and all the bugs or subpar manufacturers have long been identified. Vapor4Life buys renowned manufacturers of batteries only such as Samsung, LG, and Aspire VRK.

topside dual mod

Lithium ion batteries are not dangerous in itself, but common sense is needed. We recommend that you review this article on 18650 battery safety. The same safety rules apply to drip tanks all lithium-ion, including 21700 battery that is the subject of this article.

Enter 21700
The battery of the Tesla Roadster is made from bricks made from 69 18650 batteries. 99 of these bricks are linked to form a sheet and 11 sheets are layered to create a power supply that weighs just under 1000 pounds.

Even the most powerful mod subohm requires nothing quite as complicated, but there is always a need for greater battery capacity. Enter the lithium-ion 21700. The naming convention based on the size remains the same. The 21700 is 21 mm in diameter and 70mm in length.

The price of 21700 lithium ion battery has dropped to the point where it is a viable competitor to the popular 18650. Thus, in a world where more is not always better, will replace the 21700 18650 and become the gold standard for mods Vape in the coming years?
The case of 21700
After years of reliable service, why vapers need a new battery? A case can be made that the form and function of engine mods 18650 is nearing perfection. Ergonomically and aesthetically beautiful functional, there is a mod 18650 to fit any size of a human hand. Thin tubes battery three fog machines of the battery, the 18650 has proven quite adaptable.

Milliampere-hour (mAh) is the unit of measurement for battery life and has a great advantage 21700 on 18650 21700 A battery manufactured by a reputable manufacturer will provide in the neighborhood of 4,000 mAh. This may not seem like a revolutionary advance over 3000 mAh of 18650, but a third longer battery life makes a big difference.

If you can not make it through the day without a battery exchange, the extra touch of 21700 can save you the hassle of carrying a spare battery. Subohm VAPERS using e-juice-guzzling, low resistance mods are the obvious beneficiaries of the greatest 21700 battery.

There are obvious advantages over a model using more than one battery. Two 21700 batteries provide almost as much life as three 18650s. The 21700 is not really more expensive seen in these terms. They provide a third more battery life and costs about a third more. This is not too surprising. The lithium-ion technology is the same. The difference is size.

Vapers that use single battery box and tubes mods have a larger battery. It is a bit cumbersome but can be further be incorporated in the simplified design.

21700 Compatibility
Unless you use a mod with a built-in lithium polymer battery, such as Voopoo Mojo system is likely much of their careers kit 18650s. The good news is that even if the 18650 21700 supplants in future changes, availability should not be affected. The 18650 will not disappear soon. It is quite common in laptops and extra millimeters are really important in this application.

The current industry trend is to make mods that are compatible with both 18650 and 21700. This battery is the best of both worlds. No need to start from scratch with its power supply and gradually make the transition to life in the top of the 21700. The battery Aspire Dynamo is compatible with 18650, 21700 and 20700 batteries. Smok Grip Mag also runs on 18650 and 21700 batteries. As for the burden of the 21700, the Nitecore Intellicharger is capable of juicing up the two sizes of lithium ions.

Need 21700 batteries?
Vape how to determine the amount of benefits derived from the larger battery 21700. If you are one of the first of the new squonk vape technology, it makes sense to test a mod based on the larger battery. If you are chasing giant, delicious clouds all day, burning through both mail and juice batteries, you can benefit from the battery.

If your vaping is done in the configuration of lower energy, using high-strength coils levels NIC, 18650 battery is probably fine for your purposes. Mech mod users can also benefit from the larger battery. Not only can you get life, but 21700 batteries often have a maximum continuous discharge rate higher, although this varies by manufacturer.

If you are not satisfied with your current device, you can be sure that the 18650 will not go away. But do not be surprised to see the mods out to the market that are compatible with 18650 and 21700 lithium ion batteries. Then a computer graphics that summarizes vv mods the main advantages of the 18650 and 21700 lithium ion shown.

Vape Policy: New Zealand Supports Legalization Of VAPE

Another ray of hope for Vapers?
The UK has always been seen as a beacon of hope for former smokers who Vape. Now we can add New Zealand to the ranks of countries that have adopted a rational and humane vision of vaping dovpo m vv.

Unlike the US, where what has been framed as a teenager epidemic vaping it is being used to deny access to e-cig Adults, the National Health Service of the UK is famous for vaping actively promoted as an alternative to the cigarettes.

An NHS resource page, use of e-cigarettes to quit smoking, adopt a stance that contrasts sharply with the zombie vaping tired myths that are endlessly regurgitated by opponents of vaping in the US.

As a single-payer system, the NHS has a lot of skin in the game. health modalities deemed ineffective, inefficient, or expensive are dismissed immediately. Acupuncture, herbal medicine, and homeopathy have been brutally stabbed by the NHS.

Vaping remains in goodwill counters the UK, and attribute their higher rates of quitting this policy. Also, it is worth noting that despite the promotion vaping, the UK has lower rates of teen vaping the US.

New Zealand is another country that has decided not to punish marginalized groups with strict laws e-cig. Vaping ‘could disrupt significant inequalities that are present “in the demographic composition of the population smoking squonk mod, according to the mission statement of the Ministry of Health of New Zealand in vaping.

Refer to the elephant in the room, the poor and marginalized groups are much more likely to spray and smoke. As the rich, they have largely abandoned smoking, which is much more willing to suppress any use of nicotine and see your vaping as a foreign and disreputable activity.

basium vape

Compare how vaping is how alcohol is portrayed in the media and politicians. Wealthy and educated Americans drink more than any other group, and this explains why there is not a massive protest on the scourge of alcohol. A total of 88,000 US adults die prematurely each year because of alcohol.

The CDC reports that every year 4,300 American teenagers die and 100,000 are sent to the emergency room because of the plague of alcohol. I am not advocating the ban. My question is: If the vaping adolescents are considered an epidemic, then what should be classified as alcohol?

New Zealand has adopted a moderate course that promotes vaping as an alternative to snuff consumption, while not encourage e-cig use among non-smokers and children.

Total abstinence and prohibition?
Vaping critics have buried their heads in the sand and ignore the New England Journal of Medicine study where VAPING crushed nicotine replacement therapy. Instead, they continue to support and nicotine replacement nicotine sees total abstinence as the gold standard inviolable.

How a fanatic who promotes complete abstinence and prohibition as the solution to all risky adolescent behaviors be seen by the San Francisco Board of Supervisors, who have adopted this approach with regard vaping dovpo nickel 230w mod the same.

In view of the multitude of all, no matter abstinence VAPING proved twice as effective as nicotine replacement. Instead, we chose to fixate on the fact that a higher percentage of users successfully nicotine replacement was the whole nicotine years later one free. There are two glaring holes in this argument.

The first is that almost twice as many users of nicotine replacement were still smoking compared to the vaping group. The second is that a complete structure and tradition of counseling, assessment, narrows and quit smoking has been erected around the nicotine replacement therapy.

For the United States vaping companies and stores Vape work around the statutes of the FDA and CDC and promote the progressive reduction of nicotine without promoting e-CIGS as a tool to quit.

The difficulty of this balancing act exposes the obvious structural differences between the diffuse vaping industry and the symbiotic relationship between a large pharmaceutical and medical industries. In the US, it is difficult for regulators or politicians to Envision loans no vaping support and promotion of a coded track vaping nicotine zero.

New Zealand pushes Vaping While San Francisco Burns (cigarette)
The e-cig ban of San Francisco betrayed a tradition of humane treatment of the dispossessed, marginalized, and impoverished. While seen as a bastion of LGBTQ + rights, San Francisco is punishing a group Vapes and smoke at a higher rate than any other.

San Francisco operates at the forefront of harm reduction policies when it comes to the more than 24,000 IV drug users, who inhabit the city. 4.5 million needles annually and are distributed are supporting a bill that would establish safe injection. However, this same leadership topside seems eager vapers funnel back into fuel cigarettes.

The e-cig ban punishes San Francisco marginalized residents who lack the time, mobility, or financial means for vaping supplies outside the city limits. Ironic, considering the city it is seen as providing superior benefits to its huge population homeless.

New Zealand has chosen to take a more nuanced view of vaping. Lawmakers in the US should take note.

New Zealand Promotes Vaping
Previously, vaping policies varied from the US, Australia, and the UK were examined. Left out of this discussion was New Zealand. They have adopted a moderate average. It is worth examining your Vaping Facts website the Ministry of Health. a relatively fair shake vaping is given to the beleaguered industry, debunking myths that are seen as inviolate made by anti-US vapers and urging non-smokers to stay away from electronic cigarettes.

Here is the new Ministry of Health official position on Vaping Zealand:

The best thing you can do for your health is to be smoke-free and free vape.
Vaping is not for children or youth.
Vaping can help some people quit smoking.
Vaping is not harmless but is much less harmful than smoking.
Vaping is non-smoking.
This position is simple and mirrors statements made by former Commissioner Scott Gottlieb FDA, who said it would be a net benefit if every smoker switched to vaping.

Health page New Zealand has a contest, and a resource page entitled Tips for Success. None of this would be permissible remotely in the United States. There is also an impressive list of organizations that support this message. Here is a collage of screenshots of the facts New Zealand Vaping page.

New Zealand vs the United States
Worth visiting the page of the Ministry of Health of New Zealand. It is a stark reminder of how far into the weeds that activists have withdrawn from the debate vaping in the US.

In the land of the free and the home of the brave, politicians are obsessed with banning flavors that adults prefer, ignorant of the fact that eJuice retro packaging and flavors are directed to adults. It is no coincidence that companies Vape juice mimic the style and flavors of sweet and cereals peaked in popularity during the Reagan era.

All the time, anti-vapers ignore the fact that the packaging staidly Mint Juul, a derivative of menthol, the flavor is preferred and minor device. The FDA is getting progressively, threatening the prohibition and sheath Juul vaporizer. Politicians, who do not know what salt is nic, continue to churn out legislation such as the Law on children safe.

What is needed to convince the ignorant politicians and lobbyists as Initiative Truth titled-Orwellian that is the X generation and the generation of former smokers millennium are buying juices Vape that mimic the flavors of his childhood?

Young people today could care less about what was fashionable in 1987. It is always important to note that Milenario is not equal to low, and the recent reduction in smoking rates does not cover a generational group between 25 and 39 years old.